![]() Our clients use this information to set specifications for incoming parts to prevent problems before they may occur. The TIDES Lab is a research, innovation and development unit dedicated to the surfing industry and other watersports. Low milligram levels of loading can be detected. A clean work area is much safer than a cluttered or dirty one, and all laboratory personnel. The liberated particles are collected, dried, and then weighed to determine the average mass per part or mass collected per square centimeter (area of the part must be provided by the client). A principal cause of laboratory accidents is poor housekeeping. PTL has the capability to determine the particulate loading of contaminating particles from a batch of small parts by either pressurized rinsing or ultrasonic cleaning of parts using aqueous-based cleaners. Verifying and ensuring the cleanliness of small parts prior to system assembly is a common test to ensure the quality of incoming parts, qualifying suppliers, and producing a reliable product. Residual particles from the manufacturing, packaging and/or assembling process often need to be removed prior to use. Now offering large part cleanliness testing services, including crankshaft and axle assemblies, performed in a cleanroom environment Zeiss Axio v16 Imaging. and procedures are required, depending on the cleanliness level of the facility. Further notes on data tidiness Organizing your data properly at this point of your experiment will help your analysis later. ![]() used in braking, transmissions and combustion systems. Trained laboratory personnel must understand how chemical laboratory. Especially, in the automotive and aerospace industry where foreign particles can result in failure of valves, gears, bearings, etc. The cleanliness of small parts and components is a concern in a variety of industries.
0 Comments
Leave a Reply. |